- Stock: 15-20 Ημέρες
- Model: BSP-115PV-15A
- EAN: 4711605287937
Industry-leading Integration of PoE Technology and Renewable Power System
PLANET’s newly-launched Renewable Energy Industrial 802.3at PoE Ethernet Switch, the BSP-115PV-15A, can be charged by the inexhaustible and natural source of energy, such as solar, wind and hydroelectric power to conserve energy so as to economically power these remote IP cameras and wireless APs.
The BSP-115PV-15A is equipped with 5 10/100/1000BASE-T copper ports supporting 802.3at PoE+ injector function, a total PoE power budget of up to 120 watts and 1 extra 100/1000BASE-X SFP fiber port especially used for such expansive applications as dams, forests, deserts, national parks, nature/animal protection areas and highways. It is designed to efficiently handle power distribution for a versatile array of connected devices which meet the Environmental, Social, and Governance (ESG) principles. Leveraging cutting-edge IP-based technology, PLANET has transformed conventional Power Over Ethernet (PoE) into genuine networking devices that align with sustainable and responsible business practices.
Zero-Carbon and Stable Power Supply
The 12V/24V lithium, lead-acid or lithium iron battery gets recharged by way of the BSP-115PV-15A where solar power is sourced. Thus, the BSP-115PV-15A will keep powering PD like wireless PoE AP without a cable and a wired camera connected to its port with a UTP cable. Its zero-carbon feature is made possible as the energy the unit gets is renewable. Most importantly, the operation of outdoor wireless IP-based surveillance can be continued into the night as the battery is charged during the day.
Smart Battery Management
The BSP-115PV-15A features the following special power management functions:
- Current battery usage status by percentage
- Over budget PoE port disconnection protection
Smart and Intuitive LCD Monitoring
As the front panel of the BSP-115PV-15A provides an intuitive panel, you can check the current solar energy and battery statuses on the BSP-115PV-15A LCD screen. This easy operation can enhance the energy management efficiency of renewable PoE switches as the following special status functions are included:
- Displays solar input voltage and current power
- Displays battery voltage and current power
- Displays PoE current power
- Displays battery remaining and remaining charging time
- Displays temperature and humidity information
Intelligent Powered Device Alive Check
The BSP-115 Series can monitor connected PD status in real time via PD alive check function. Once the PD stops working and responding, the BSP-115 Series will resume the PoE power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.
802.3at PoE+ Power and Ethernet Data Transmission Distance Extension
Its DIP switch can set the system to extend mode. In addition, the BSP-115PV-15A is equipped with VLAN technology and operates on a per-port basis at 10Mbps duplex operation. It can also support 21.2-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable.
With this brand-new feature, the BSP-115 series provides an additional solution for 802.3at PoE distance extension, thus saving the cost of Ethernet cable installation.
Multiple Battery Options for All Market Requirements
The BSP-115 Series features a variety of battery options, including lead-acid, lithium, and lithium iron batteries. Lead-acid battery offers a cost-effective option while lithium battery offers higher energy density and lightweight design, and lithium-iron battery combines high energy efficiency with durability. The renewable PoE switch provides a flexible, reliable solution that ensures all applications can continue to run without a glitch.
Temperature Sensor for Battery Protection
The BSP-115 series is equipped with a temperature sensor for battery protection. When the sensor detects the battery temperature reaching above 70~75 degrees C, the PoE high-current power supply will be stopped to cool down and protect the battery.
The BSP-115PV-15A also provides humidity sensing function, allowing users to easily grasp environmental humidity information.
| Hardware Specifications | |
|---|---|
| Copper Ports | 5 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| SFP Port | 1 100/1000BASE-X SFP ports |
| Connector | Removable 6-pin terminal block Pin 1/2(+/-) , 3/4(+/-) for PV panel (In parallel); Pin 5/6(-/+) for battery charging and discharging The PV input is compliant with DC input but cannot be connected simultaneously with solar input to prevent damage to the device. |
| DIP Switch | Front Panel: Alive Check: All PoE ports enable PD Alive check function. VLAN: Port isolation Extend: Long distance PoE switch. Rear Panel: PWR: Equipment power switch BAT: Battery type switch BV: Battery voltage switch LiFe: Lithium iron phosphate switch |
| Power Requirements | Supports 20-27V solar panel input (open circuit
voltage) with 12V battery, maximum solar panel input power of 405W, and
maximum circuit 15A. Supports 32-45V solar panel input (open circuit voltage) with 24V battery, maximum solar panel input power of 675W, and maximum circuit 15A. |
| Charging Function | Integrated automatic charging and discharging, maximum efficiency 98%, maximum charging current 15A Integrated battery protection function Integrated battery float charging function Supports over-temperature protection function |
| Battery Type | Based on Full Loading power consumption: 12V / 24V lead-acid battery, maximum charging current 15A 12.6V/25. 2V lithium battery, maximum charging current 15A 14.6V/29.2V lithium iron battery, maximum charging current 15A Note: Recommended capacity 500AH in fully power 120W usage |
| Power Consumption/ Dissipation | 3 watts, 10.2BTU (Standby without PoE function) 140 watts, 477 BTU (Full loading with PoE function) |
| Dimensions (W x D x H) | 142 x 197 x 34 mm |
| Weight | 820g |
| LCD Monitor (W x D) | 26.77 x 16 mm, 1.1-inch |
| Temperature Sensor | Temperature Detector -20 ~ 120 degrees C Humidity Detector 0 ~ 100 % RH |
| ESD Protection | ±8KV air gap discharge ±4KV contact discharge |
| Surge Immunity | 2KV |
| Enclosure | IP30 metal case |
| Installation | Desktop/Wall-mount ear |
| LED Indicators | Front Panel: System: Green: PWR ,BAT.out,BAT.in Per 10/100/1000T RJ45 Port: (Port 1~Port 3): Green: LNK/ACT (10/100/1000Mbps) Amer: PoE-in-use Per 10/100/1000T RJ45 Port: (Port 4~Port 5): Green: LNK/ACT (10/100/1000Mbps) Amer: 1000Mbps Green: PoE-in-use Per SFP Port: (Port 6): Green: LNK/ACT (100/1000Mbps) Rear Panel: System: Green: SYS, PWR, PV in Battery: Green: BAT.out, BAT.in, BAT.V in |
| Switching Specifications | |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 12Gbps/non-blocking |
| Switch Throughput | 8.92Mpps@64 bytes |
| MAC Address Table | 2K entries |
| Shared Data Buffer | 2.5Mb |
| Jumbo Frame | 10K bytes |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3at Power over Ethernet PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | Per port 48V DC, max. 35 watts |
| Power Pin Assignment | Port 1: 1/2 (+), 3/6 (-), 4/5(+), 7/8(-) Ports 2~5: 1/2 (+), 3/6 (-) |
| PoE Power Budget | Maximum 120W (depending on power input) |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Standards Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3z Gigabit SX/LX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3at Power over Ethernet Plus IEEE 802.3az Energy-Efficient Ethernet |
| Environment | |
| Operating | Temperature: -20 ~ 65 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage | Temperature: -40 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
