Destination :
Enclosures with DIN rail for RACK cabinets are intended for mounting equipment located inside. Each enclosure has rail, length: 24×1S. Height of module cannot exceed 160mm.
Mounting dimensions ..
Destination :
Mounting plate of 4U high with DIN rail is designed for mounting devices on DIN rail in rear side of RACK 19″ cabinets. Combination of rail with steel plate ensures rigid mounting of device on rail including possibility of attaching power cab..
Destination :
RAWO7 metal enclosure is designed for mounting alarm control panel and input/output modules in RACK 19" cabinets. This enclosure is fitted with removable mounting plate (level I) and removable hinged mounting plate (level II).
..
Destination :
Battery enclosure for RACK 19" cabinets designed for installation of 2×17Ah or 4×7Ah batteries. It is mounted in rear of RACK cabinet (of RWA/RW/RWD/RS and ZRS series) behind buffer power supply units and buffer switches by Pulsar.
..
Destination :
Battery enclosure for RACK 19″ cabinets designed for installation of 4×17Ah or 4×7Ah batteries. It is fitted with four BAT1÷BAT4 connectors for capacity and voltage configuration of batteries inside enclosure.
..
Destination :
RACK security enclosures are designed for mounting alarm control panel and input/output modules in free-standing RACK 19″ cabinets with depths in range from 800 to 1000mm.
Installation of control p..
Destination :
RACK security enclosures are designed for mounting alarm control panel and input/output modules in free-standing RACK 19″ cabinets with depths in range from 800 to 1000mm.
Installation of control p..
Destination :
Enclosures with DIN rail for RACK cabinets are intended for mounting equipment located inside. Each enclosure has rail, length: 24×1S. Height of module cannot exceed 160mm.
Batteries ..
Destination :
Voltage distribution panel is intended for mounting fuses, type: S in RACK 19″ cabinet. One enclosure can accommodate max. 24 fuses, 1 S wide.
Mounting dimensions :
..
Due to its design, the ARAD4N enclosure is intended for mounting inside RACK 19" cabinets, with depths of 600 – 1000mm, 19" standard. This general-purpose enclosure may serve as an auxiliary element for integrating CCTV, AC, I&HAS, RTV, LAN systems in RACK 19” cabinets. It is intended for mounti..
Showing 1 to 10 of 10 (1 Pages)