UBIQUITI EP-R6 UISP EdgePoint R6

Ζητήστε Περισσότερες Πληροφορίες

Download Datasheet

Περιγραφή
Specifications

EdgePoint R6 (EP-R6)

The EdgePoint, part of the EdgeMAX platform is the first application-specific designed WISP control point. The EdgePoint combines EdgeMAX routing features with fiber backhaul and versatile powering capabilities.

The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity.

A single, compact controller efficiently eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance.

The ruggedized case withstands outdoor conditions, including wind, rain, and snow. The included cable sleeve protects the cables and cable opening. If you prefer, you can swap it out for your own conduit.

For the EP-R6, powerful routing features - such as load balancing and failover - provide redundancy and increased performance for outdoor wireless links.

The EP-R6 offers robust features, including:

VLAN interfaces for network segmentation
Static routes and support of routing protocols: OSPF, RIP, and BGP
Firewall policies and NAT rules
Application identification with Deep Packet Inspection (DPI)
DHCP services
Quality of Service (QoS)
Network administration and monitoring tools
Administrator and operator accounts
Comprehensive IPv6 support

Mechanical
Dimensions	188.6 x 177.1 x 49.8 mm (7.43 x 6.97 x 1.96")
Weight	605 g (1.33 lb)
Enclosure Characteristics	UV-Resistant Polycarbonate
Mount	Pole Mount
Wind Loading	46 N at 200 km/h (10.34 lbf at 125 mph)
Wind Survivability	200 km/h (125 mph)
Hardware
Max. Power Consumption	7W (Excludes PoE Output)
Power Input*	(1) DC Terminal Block (1) RJ45 (eth0) *Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs
Power Supply	Min. 24V / 0.3A (Excludes PoE Output Power)
VDC Input	24V, 3A
Passive PoE Input*	(1) 24V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth0 *Do NOT Configure eth0 in PoE Output Mode if You Are Using a PoE Input Power Source.
Passive PoE Output	(5) 24V / 0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, eth0 to eth4
Power Monitoring	(1) DC Terminal Block, Input Power (1) RJ45, eth0, Input Power
Supported Voltage Range	26 to 16VDC
Button	Reset
LEDs System eth0 to eth4 eth5/SFP	Power Speed/Link/Activity, PoE Speed/Link/Activity
Ports Data Ports	(5) 10/100/1000 RJ45 Ports (1) 1 Gbps SFP Port
Processor	Dual-Core 880 MHz, MIPS1004Kc
System Memory	256 MB DDR3-1600 RAM
Code Storage	256 MB NAND
Operating Temperature	-40 to 65° C (-40 to 149° F)
Operating Humidity	10 to 90% Noncondensing
Certifications	CE, FCC, IC

Αξεσουάρ
Σχετικά προϊόντα Βάσει Κατηγορίας

UBIQUITI UF-RJ45-1G SFP Accessories

SFP to RJ45 transceiver module that delivers 1 Gbps speed via a converted Ethernet connectionThe 1G SFP to 1GbE RJ45 Module is a RJ45 transceiver that..

MIKROTIK CCR2004-1G-12S+2XS

The “Improvise. Adapt. Overcome.” mindset can be very helpful, but sometimes you simply need a device that works and solves the problem without additi..

MIKROTIK Cloud Core Router, 16 x 1G Ports + 2 x 10G SFP+ ports + USB 3.0 typ A

Like the other models in CCR2004 series, this CCR also features the Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores running at 1,..

MIKROTIK RB1100x4 RB1100AHx4

Introducing RB1100AHx4, 13x Gigabit Ethernet ports Router, powered by Annapurna Alpine AL21400 CPU with four Cortex A15 cores, clocked at 1.4GHz each,..

MIKROTIK RB3011UiAS-RM

The RB3011 is a new multi port device, our first to be running an ARM architecture CPU for higher performance than ever before. The RB3011 has ten Gig..

MIKROTIK RB4011iGS+5HacQ2HnD-IN

B4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price!The RB4011..