Distance Extended with Fiber Optic Cable

Name: PLANET 10/100Base-TX to 100Base-FX (SC, SM) Smart Media Converter-15km
Brand: PLANET
Availability: OutOfStock

PLANET FST-80x Smart Media Converter series provides media conversion between 10/100BASE-TX and 100BASE-FX interfaces, such as multi-mode ST/SC connectors (2km), single-mode SC connector (15/35/50km) and single fiber connector using the wavelength-division multiplexing (WDM) technology (20/60km) to enable to extend links over long distances using fiber optic cable.

Enhanced Smart Management Features

The FST-80x series provides auto MDI/MDI-X on their TP port and store-and-forward mechanism to eliminate faulty packets. Use the DIP switch from the FST-80x to configure the available smart functions, such as the half/full duplex, auto-negotiation / force and 10/100Mbps options for TP and fiber interfaces. Besides, the Link Loss Return (LLR) and Link Loss Carry Forward (LLCF) functions can immediately alarm network administrator once there is a media link issue, thus helping to monitor the status of the entire network.

Easy Installation

The FST-80x series can be connected easily and cost-effectively as these smart media converters can be used as a standalone unit when powered on by its DC adapter, or used as a slide-in module connected to PLANET 19-inch, 16-slot web smart/managed media converter chassis (MC-1600MR/MC-1600MR48 and MC-1610MR/MC-1610MR48). When working with the web smart/managed media converter chassis, the status of the FST-80x can be monitored via the local RS-232 console and remote web interface.

Hardware Specification
Standards	IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX and 100BASE-FX
Copper Port	1 x 10/100BASE-TX port, auto-negotiation, auto-MDI-MDI-X
Optical Port	1 x 100BASE-FX
Fiber Connector	FST-801: ST / Multi-mode -- 2km FST-802: SC / Multi-mode -- 2km FST-802S15: SC / Single Mode -- 15km FST-802S35: SC / Single Mode -- 35km FST-802S50: SC / Single Mode -- 50km FST-806A20: WDM SC / Single Mode -- 20km FST-806B20: WDM SC / Single Mode -- 20km FST-806A60: WDM SC / Single Mode -- 60km FST-806B60: WDM SC / Single Mode -- 60km
Optical Wavelength	FST-801: 1310nm FST-802: 1310nm FST-802S15: 1310nm FST-802S35: 1310nm FST-802S50: 1310nm FST-806A20: TX: 1310nm, RX: 1550nm FST-806B20: TX: 1550nm, RX: 1310nm FST-806A60: TX: 1310nm, RX: 1550nm FST-806B60: TX: 1550nm, RX: 1310nm
Maximum Launch Power (dBm)	FST-801: -14 FST-802: -14 FST-802S15:0 FST-802S35:-8 FST-802S50:0 FST-806A20:-8 FST-806B20:-8 FST-806A60:0 FST-806B60:0
Minimum Launch Power (dBm)	FST-801: -20 (62.5/125µm), -23.5 (50/125µm) FST-802: -20 (62.5/125µm), -23.5 (50/125µm) FST-802S15: −20 FST-802S35: -15 FST-802S50:-5 FST-806A20:-14 FST-806B20:-14 FST-806A60:-5 FST-806B60:-5
Receive Sensitivity (dBm)	FST-801: -31.8 FST-802: -31.8 FST-802S15: -32 FST-802S35:-34 FST-802S50: -35 FST-806A20:-31 FST-806B20:-31 FST-806A60:-34 FST-806B60:-34
Maximum Input Power (dBm)	FST-801: -14 FST-802: -14 FST-802S15:0 FST-802S35:0 FST-802S50:0 FST-806A20:0 FST-806B20:0 FST-806A60:0 FST-806B60:0
Speed	Ethernet: 10/20Mbps for half / full-duplex Fast Ethernet: 100/200Mbps for half / full-duplex
Maximum Forward Packet Size	1600Bytes
DIP Switch	DIP-1: Fiber full / half duplex mode DIP-2: Copper forced mode / auto-negotiation mode DIP-3: Copper speed 10Mbps / 100Mbps DIP-4: Copper full / half duplex mode DIP-5: Fiber LLR (Link Loss Return) enable / disable DIP-6: Fiber LLCF(Link Loss Carry Forward) enable / disable
LED Indicator	System: PWR TP: LNK/ ACT, FDX/ COL, 100 FX: LNK/ ACT, FDX/ COL
Power Input	DC 5V, 2A
Power Consumption	6.2 watts/ 21 BTU (maximum)
Dimensions (W x D x H)	94 x 81 x 26 mm
Weight	0.22kg
Cable	10BASE-T: 2-pair Cat3, 4, 5 UTP cable, up to 100 meters 100BASE-TX: 2-pair Cat5 UTP cable, up to 100 meters 100BASE-FX: -50/ 125μm or 62.5/ 125μm multi-mode fiber cable, up to 2km - 9/ 125μm single-mode cable, providing long distance of 15/20/35/50/60km
Operating Environment	0~50 degrees C, 5~90% RH
Storage Environment	-10~70 degrees C, 5~90% RH
Emission	FCC Class B, CE mark