Name: UBIQUITI F-POE-G2 Optical Data Transport for Outdoor PoE Devices
Brand: UBIQUITI
Availability: OutOfStock

UBIQUITI F-POE-G2 Optical Data Transport for Outdoor PoE Devices

ΔΙΑΘΕΣΙΜΟΤΗΤΑ: 10-15 Ημέρες
Κωδικός Προϊόντος: F-POE-G2
UPC: UBI-00288
EAN: 817882024686

UBIQUITI

Ποσότητα

Καλάθι

Επιθυμητό Σύγκριση

Ζητήστε Περισσότερες Πληροφορίες

Download Datasheet

Περιγραφή
Specifications

The FiberPoE is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE also provide significant EMI and ESD protection over typical PoE installations. PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs. The FiberPoE provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE device as an Fiber-to-Ethernet Converter, or a pair of FiberPoE devices to create a Fiber Bridge.Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI). Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable. The FiberPoE supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.

UBNT-F-POE-G2 can be powered in several ways - table below
Key features:

Data and power are transported on separate cables
Can be powered in several ways
Surge protection EMI / ESD
1x SFP, 1x 1000Mbps Ethernet

Specifications
Model	F-POE-G2
Dimensions	196.4 x 93.5 x 32.4 mm ( 7.73 x 3.68 x 1.28")
Weight	288 g (10.2 oz)
Enclosure	White Polycarbonate
Interface Connections	(1) 1 Gbps SFP Port (1) DC Terminal Block (1) DC RJ45 Port DC Injection (1) 1000 Mbps Ethernet PoE Port 10/100 Mbps Ethernet not supported
Typical Power Consumption	1.5W
Power Method	DC Terminal Block, 2-Wire, 24VDC or 50VDC DC In RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or 4-Pair (24VDC or 50VDC Input) Passthrough PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or 4-Pair (24VDC or 50VDC Input) PoE Passthrough
PoE Output	PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC), or 4-Pair (24VDC or 50VDC) PoE
DC Output	Terminal Block, 2-Wire (24VDC or 50VDC)
Input DC Voltage	16 to 57V
Surge Protection	Built-In High-Current Gas Discharge Tube for DC Terminal Block and PoE Port
LED	White: Power On Blue: Connected Blue (Flashing): Activity
Operating Temperature	-40 to 60° C (-40 to 140° F) May be further restricted by the operating temperature range of the SFP module being used.
Operating Humidity	10 to 95% Noncondensing
ESD/EMP Protection	± 24kV Contact / Air for Ethernet
Certifications	CE, FCC, IC