UBIQUITI AF-24HD UISP airFiber HD 24 GHz Bridge

Ζητήστε Περισσότερες Πληροφορίες

Download Datasheet

Περιγραφή
Specifications

Ubiquiti airFiber 24HD

AirFiber 24HD from Ubiquiti Networks is a revolutionary product used to implement point-point radio link ( to create radio link are needed 2 devices ), providing high performance. It works without licence in free 24GHz band. Unique contruction of this compact device uses two antennas MIMO 2x2. Smaller antenna 33dBi works as transmitter, second antenna, with 38dBi, works as receiver. This solution allows EIRP in order to meet legal requirements. High power transmitter allows to obtain link up to 20 km. airFiber has built-in GPS receiver and supports AirSync technology, which allows device mounting in places with high density radiolinks and allows functionality without disruption.

Main features:

Real throughput up to 2Gbps in HDD mode
Maximum distance up to 20 km
Plug-and-play installation
LED display
Gigabit Ethernet RJ45
Management over dedicated Ethernet port
Support forAirSync technology (built-in GPS receiver)
Unique design and functionality - two MIMO 2x2 antennas
128-Bit AES encryption

Mechanical
Dimensions	593 x 768 x 370 mm (23.35 x 30.24 x 14.57")
Weight	17.3 kg (38.14 lb)
Mounting	Pole mount kit (Included)
Wind loading	770 N @ 200 km/h (170 lbf @ 125 mph)
Wind survivability	200 km/h (125 mph)
Hardware
Networking interface	(1) 10/100/1000 MbE port (1) 10/100 MbE port
Auxiliary port	(1) RJ-12, alignment tone port
Power method	Passive PoE
Power supply	50V, 1.2A PoE GigE adapter (Included)
Supported voltage range	42—58V DC
Max. power consumption	50 W
Operating frequency	24.05 – 24.25 GHz
Operating temperature	-40 to 55° C (-40 to 131° F)
Certifications	CE, FCC, IC
System
Max. throughput	2 Gbps
Ma. range	20+ km
Packets per second	1+ million
Encryption	128-bit AES
Uplink/Downlink ratio	50% fixed
RF
GPS	GPS clock synchronization
EIRP	~33 dBm (FCC/IC) ~20 dBm (CE) ~40 dBm (Other Regions)
Frequency accuracy	±2.5 ppm without GPS synchronization ±0.2 ppm with GPS synchronization
Channel bandwidth	100 MHz
Operating frequency	24.05 – 24.25 GHz
Operating channels	24.1 GHz, 24.2 GHz
Modulation	256QAM 64QAM 16QAM QPSK MIMO QPSK SISO ¼x QPSK SISO
Gain TX RX	33 dBi 40 dBi
Beamwidth
Front-to-back ratio	70 dB
Polarization	Dual-slant
Cross-polarity Iiolation	> 28 dB
LEDs
System	(8) Status LEDs: Data port speed Data port link/activity Configuration port speed Configuration port link/activity GPS synchronization Modulation mode Master/slave RF status (1) Two-digit LED display calibrated in dBm

Αξεσουάρ
Σχετικά προϊόντα Βάσει Κατηγορίας

UBIQUITI USW-Pro-24-PoE Switch Pro 24 PoE

A 24-port, Layer 3 switch capable of high-power PoE++ outputUSW-Pro-24-POE is a 24-port L3 managed switch with PoE support.The switch has 24 RJ45 port..

UBIQUITI USW-Pro-48-PoE Switch Pro 48 PoE

A 48-port, Layer 3 switch capable of high-power PoE++ output The USW-Pro-48-POE is a configurable Gigabit Layer2 and Layer3 switch with aut..

MIKROTIK CubeG-5ac60aypair Wireless Wire Cube

Νέο

Wireless Wire Cube Pro A preconfigured kit of two Cube 60Pro ac (802.11ay 60 GHz) devices: the Wireless Wire Cube Pro. Just point the Cubes at ..

The LHG mount is a basic pole mount adapter for LHG series products.• Simple and low cost. • Supports all LHG series, products, including LHG XL...