Menu
Your Cart

UBIQUITI PowerBeam M5-400 ISO

UBIQUITI PowerBeam M5-400 ISO
UBIQUITI PowerBeam M5-400 ISO
  • ΔΙΑΘΕΣΙΜΟΤΗΤΑ: 10-15 Ημέρες
  • Κωδικός Προϊόντος: PBE-M5-400-ISO

The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. The big advantage of this housing is its easy installation (one bolt).

Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.

Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is extremely versatile and cost-effective to deploy.

PBE-M5-400-ISO System and Regulatory/Compliance
Processor SpecsAtheros MIPS 74Kc, 560 MHz
Memory64 MB DDR2, 8 MB Flash
Networking Interface10/100 Ethernet Port
Wireless ApprovalsFCC, IC, CE
RoHS ComplianceYes
PBE-M5-400-ISO Physical/Electrical/Environmental
Dimensions459 x 459 x 261 mm (18.07 x 18.07 x 10.28")
Weight3.22 kg (7.10 lb)
Power Supply24V, 0.5A PoE
Power MethodPassive PoE (Pairs 4, 5+; 7, 8 Return)
Supported Voltage Range18-26VDC
Max. Power Consumption8W
Gain25 dBi
Operating Frequency:
Worldwide
USA

5170 - 5875 MHz
5725 - 5850 MHz
Wind Loading390 N @ 200 km/h (88 lbf @ 125 mph)
Wind Survivability200 km/h (125 mph)
LEDsPower, (1) LAN, (4) WLAN
Signal Strength LEDsSoftware-Adjustable to Correspond to Custom RSSI Levels
Channel Sizes5/8/10/20/30/40 MHz
PolarizationDual Linear
EnclosureOutdoor UV Stabilized Plastic
MountingPole-Mount Kit Included
ESD/EMP ProtectionAir: ± 24 kV, Contact: ± 24 kV
Operating Temperature-40 to 70° C (-40 to 158° F)
Operating Humidity5 to 95% Non-Condensing
Salt Fog TestIEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration TestIEC 68-2-6
Temperature Shock TestIEC 68-2-14
UV TestIEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4
Wind-Driven Rain TestETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5